Adhesive Remover Cleaning Card
featuring Waffletechnology® (2"/51mm)
KW3-T26B15AR - 15 Cleaning Cards per Box
Use this adhesive remover cleaning card on all models printing on an approximate 2"/51mm label stock.
The Adhesive Remover Cleaning Card featuring Waffletechnology® was designed to loosen adhesives and remove residue from thermal printers and liner free label devices. Incorrect maintenance of the roller causes the label to wrap around it rather than advancing out of the printer. The US, Canadian and Australian patented design of raised and spring-loaded platforms is used to clean the printhead and provide enough tension to rotate the platen for a full circumference clean. Use this cleaning card on all models printing on an approximate 2”/51mm label stock with every roll change to maintain optimum printer performance.
For best results use an adhesive remover product followed by a thermal printer cleaning product.
Watch the video: How to Clean a Thermal Printer with a Thermal Printer Cleaning Card featuring Waffletechnology®
1. Turn power "Off" on printer, unplug the AC cable & remove paper from printer.
2. Remove cleaning card from pouch and insert into paper path leaving approximately 1/3 of the card sticking out of the front of the printer.
3. Close printer cover. Hold printer down securely with one hand. Using other hand, manually pull cleaning card until entire card has been pulled free.
